doors repairs to uPVC Windows

uPVC windows are a fantastic choice for modern homes. They are easy to maintain and are durable and long-lasting. Unlike timber and aluminium, they don't corrosion or rot.

Regularly cleaning and lubricating UPVC windows and doors repairs is crucial. This will prevent unnecessary repair costs and improve energy efficiency.

1. Broken Glass

The damaged glass in your windows could cause serious damage to your home, and could even be fatal. It is essential to make sure that your windows are in good working order.

Single-pane windows are relatively easy to replace and will usually fit into the frames that were previously in use very easily. If you have double glazed window repair-paned windows which are held together by internal beading, it is difficult to remove and replace the panes that were previously in use. In this instance you'll need to locate some plastic spacers to help the new pane to fit perfectly into the window frame.

If you plan attempt to remove the window panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass so that any shards will fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.

It's a great idea tape the gap once the glass has been removed. This will prevent water and drafts from entering your home until a professional comes out to fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the gap is large, you may think about the security door with an integrated window, since it will provide the best of both worlds.

2. Sagging

Upvc is a long-lasting and energy efficient alternative to timber sash windows. However, over time they may be afflicted by a variety of problems including sagging. A window that isn't properly aligned can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to prevent the problem from becoming worse.

Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows so you can access the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, shut your window and test it for an appropriate fit. If you're satisfied with the fit, you can tighten the screws to ensure that they stay in place.

If you can't reposition the hinges you may need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause their tightness to decrease. It is important to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.

UPVC handles can also become loose. This is often caused by screws that have become undone over time, but it can also be due to the handle mechanism getting worn out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to shut the window and do an initial fitting. The corner joints of the sash should align with the casing joint. If it isn't, you can make use of a screwdriver to loosen the handle, and then reverse the mechanism back into the position it was in.

3. Water Leaks

If you're waking up to wet floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is a simple fix that can be done by any DIYer who has the ability. Depending on how severe the problem is, the old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to 'over-caulk in order to make the area more difficult to clean and could reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them, and also that the sill pan has been properly angled to drain away from the window. In more serious cases you might have to consider replacing the window.

Mold spots and rotted sills are another sign of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

If your uPVC windows are difficult to open, or are loose and open with a breeze, it may be hinges that are at the fault. Any competent DIYer can replace these in a matter of minutes.

Like any mechanical part, hinges can wear out over time. The process of replacing a hinge on a window is an easy procedure, but it is easier when you have a person to help you hold the frame up.

Make sure that the uPVC hinges are closed and open in the proper direction. This can be done by checking for the arrows on each hinge, this shows which way the window should open.

The problem can be caused either due to opening the window in the wrong way or a faulty installation at the factory. Sending us photos via our website is often enough to solve the issue. We are happy to give advice.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a great method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by a variety of different things. The hinges may also become unbalanced due to wear, causing gaps between the frame and sash. They can be fixed by giving them a good cleaning, but when they're beyond repair door, via,, it might be necessary to have them realigned or replaced. The interlock, which is located on the hinge of the window, can be misaligned. Again, it's possible to give them a clean but in some cases it might be necessary to have them replaced.

The next common reason for draughts are the window seals, these are susceptible to being worn out or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the upvc windows with low-emissivity lenses. This will help regulate indoor temperatures and lessen the risk of draughts.

The final method to cut down on the amount of draughts is to use a Draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will help block out cold air and keep your home warm and cozy!

With a little regular maintenance and repair your windows made of upvc will provide an excellent level of insulation and security for your home. It is essential to remember that all windows eventually wear out and it is more cost-effective to simply replace them rather than repair them. So, if you are experiencing issues with your Upvc windows, it is always recommended to seek help from a professional immediately.