Repairs to uPVC Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. They are not susceptible to rot or rust like aluminum and timber.

It is important to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair double glazing window costs and also increase energy efficiency.

1. Broken Glass

If the glass in your window is damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is important to ensure that your windows are in good working order.

For single pane windows it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. However when you have double pane windows that are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation you'll need to locate some plastic spacers that will assist the new pane to fit properly into the frame of the window.

Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass by yourself. You should also lay down a dropcloth before you begin working on the window panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled.

Once the glass has been removed from the window, it's best to seal the gap with some clear packaging tape or pvc window repairs duct tape to block water and drafts from entering the home until a professional can come out and fix the window. It also acts as a barrier, deterring any intruders to gain access into your home. If the distance between the door and the window is large, you might prefer security screens that includes windows. This will give you the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. However, with time, they can suffer from a variety of issues like sagging. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to sag it is important to act swiftly to prevent the problem from getting worse.

To fix a window that is sagging you can try to reposition the hinges. To accomplish this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to take off the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the an appropriate fit. If you're happy with the fit, tighten the screws to ensure they stay in the right place.

If you cannot reposition the hinges, you could need to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

uPVC handles could also loosen. This is often caused by screws that have loosened over time, but it could also be due to the mechanism of the handle wearing out. It's a good thing that it's simple to fix the handle of a window that is loose yourself. First, you'll need to close your window and do an experiment to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it isn't, you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.

3. Water Leaks

If you wake up to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.

This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the issue the caulking used previously might need to be removed before a new layer can be put on. It is crucial to keep in mind that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk' as this will only make the area harder to clean and can decrease the efficiency of your energy usage.

Make sure that the drainage holes do not have debris in them, and also that the sill pan has been properly angled to allow the water to drain from the window. In more severe instances, you may need to replace the window.

Other signs of long-term water leakage are rotted sills and the appearance of black spots of mold on the walls near the pvc window repairs. This fungus thrives in damp conditions and can spread quickly throughout the house.

If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. This can be easily corrected by a uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or if it blows open with the breeze. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.

Most households in the UK will have top-hung or side-hung uPVC windows that use hinges and, just like any mechanical component they can wear down over time. It's very simple to change the hinges on a window, but it's easier if someone else helps hold the frame.

Verify that the uPVC hinges are open and closed in the correct direction. Look for the arrows on each hinge to determine which way the window should be opened.

Window hinges that aren't working properly can be caused by incorrectly opening the window a certain way or by inadequate installation at the factory. It is usually possible to fix the issue by sending us a picture on our website. We will be happy to give you suggestions.

Regular lubrication of hinges is also essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can allow the window operate and close more easily. It can also lower the risk of a window sticking and prevent corrosion. The ideal time to do this at least once a year. WD40 and other solvent based oils are not recommended because they will damage parts of your uPVC window.

5. Draughts

Draughts in windows made of upvc can be caused by various factors. Firstly the hinges, again due to wear and tear can become misaligned, this causes a gap to form between the sash and the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to have them re-aligned or replaced. Secondly the interlock, this is on the hinge side of the window and can also be misaligned, and again it may be feasible to give them a clean but in some instances it could be necessary to have them replaced.

The next most common reason for draughts is window seals. They can become worn down or damaged over time and let air escape through the gaps. Replacing these with high-quality weatherstripping can help prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen draughts.

Another method of reducing drafts effectively is to use a draught-excluder. These are typically fabric tubes filled with a filler which can be put on top of your window sill. They can help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security for your home with regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it could be more cost-effective to simply replace them instead of fixing them. If you have any problems with your Upvc window, it's best to consult a professional as soon as you can.