Repairs to Upvc Window Repair Windows

uPVC is a great choice for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is essential to clean and oil UPVC windows and doors regularly. This will reduce repair costs and increase energy efficiency.

1. Broken Glass

If the glass in your window has been damaged, it could cause a large amount of damage to your home, which can make it extremely dangerous and possibly fatal. You should take the time to ensure that your windows are in good shape.

For single pane windows, it is fairly easy to replace windows, and the new one will usually fit inside the frame of the previous one easily. If windows with double glazed window repairs panes are joined by internal beading, it is harder to remove and replace the old panes. In this situation you'll need to locate some plastic spacers to assist the new pane to fit perfectly into the frame of the window.

Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also an excellent idea to lay down a drop cloth before you start working on the glass to ensure that any shards will fall on the fabric instead of onto the floor where they can be trampled on and cause further damage.

It's a good idea to seal the gap after the glass has been removed. This will keep water and drafts from entering your home until a professional is able to fix the window. This also serves as a barrier to prevent any criminals from getting into your home. If the gap between the window and the door is substantial, you may want to use a security screen that also includes a window. This will provide the best of both.

2. Sagging

Upvc windows and doors are a low-cost, durable and energy-efficient alternative to timber sash windows. However, over time, they are susceptible to a range of problems including sagging. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

To fix a window that is sagging you can try repositioning the hinges. First, you'll need to open the windows to access the frame. Then, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you've moved your hinges. If you're happy with the fit, you can tighten the screws until they remain in the right place.

If you are unable to reposition the hinges, you might require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.

upvc window repairs near me handles may also loosen up. This is typically caused by screws that have become undone over time, but it could be due to the handle mechanism wears out. It's relatively simple to fix a loose uPVC hand. First, you'll need to close the window and do an initial fitting. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can make use of a screwdriver to loosen the handle and then return the mechanism to its original position.

3. Water Leaks

If you wake up to damp floors and mouldy walls every time it rains it is important that you take action. The leaks of water through windows could cause structural damage to your home and also hinder your ability to control the temperature of your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Based on the severity of the issue the caulking used previously may need to be removed before a fresh layer can be applied. It is crucial to remember that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.

Verify that the drainage holes have no debris in them, and also ensure that the sill pan has been angled correctly to drain away from the window. In more serious cases you may need to think about replacing the window.

Moldy sills and rotten ones are another sign of water leakage. This mold thrives in damp environments and is able to quickly spread throughout the house.

It is also important to remember that if the leakage is coming from between the glass of your double glazed window repairs double glazed window repairs near me windows, it's more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault if your uPVC window is difficult to open or it opens with a breeze. They can be easily repaired by any skilled DIYer and can usually be completed in just a few minutes.

Like any mechanical component hinges are prone to wear out over time. It's easy to replace a hinge on a window however it is easier if someone helps you hold the frame.

Verify that the uPVC hinges open and close in the right direction. Look for the arrows that are on each hinge to determine the direction in which the window should be opened.

The problem can be caused by opening the window improperly or a faulty installation in the factory. It is usually possible to fix the issue by sending us a picture via our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is essential. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication can make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.

5. Draughts

Draughts can be caused by several different factors. The hinges may also become misaligned due to wear, creating an opening between the frame and sash. If they are damaged beyond repair, it could be required to realign them. Second, the interlock can be disaligned. It is located on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace them.

The next most common cause of draughts is the window seals, these are prone to wear or damaged over time and will allow air to escape through the gaps. Replacement of these with high-quality weatherstripping will help to prevent draughts. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures and again will lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler that can be hung over your window sill. These will keep your home warm by blocking cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs. However, it is important to recognise that all windows have a life span and there may come the point when it's more economical to replace them than repair them. If you are having issues with your upvc windows, it is recommended to seek help from a professional as soon as you can.