Tips For Replacing a Window Handle

It is easy to replace your window handle from the convenience of your own home. Follow these guidelines to ensure an elegant and smooth finish.

Start by removing the screws to reveal the screws within the uPVC window handle. Take a measurement of the spindle to be sure you are getting the right size replacement.

1. Measure the Spindle length

It is crucial to have the right size spindle when replacing the window handle. This is because it could determine how tight or loose the handle is and whether it will lock correctly inside the frame of the window. The spindle is the steel shaft that connects the handle as well as the lock inside the window frame. The spindle is either a standard 8mm cross-section in the industry or the older 9mm versions. Modern industry standards are 8mm, but it wasn't always this way. It is important to check the measurements when purchasing the handle you want to purchase.

The most efficient method to determine the length of the spindle is take off the handle you have already installed and this can be done by turning it to the open position and then removing the two screws (which could be hidden behind plastic caps that need to be removed) which hold the handle. After removing the handle, you can measure from the base of the handle to the end of the spindle. This will provide you with the measurements required to buy a replacement.

There are many options when you're looking to select the right window handle. From sleek chrome that fits into a modern home to traditional burnished bronze that looks beautiful in restored Georgian rooms, or even the more classic Tudor Cottages with mongoose tails curled. There are a lot of options, but the most important thing is to select one that complements your home's decor.

Espag handles are usually fitted to uPVC windows and are always identical in size, with 43mm centers (2 fixings). Cockspur handles range between 58mm and 62mm, but luckily there are replacements available for both sizes. Window handles from Cadenza come in an entirely different dimension because they have an bent blade that is used to operate the multi-point lock mechanism within the window.

Another aspect to consider when selecting the best window handle is knowing which hand you will need, this is simply defined by what hand you use to open the door. Inline Espag handles can be used with either left or right-handed windows. Cranked window double glazed handles are handed and can only be used on windows that open in only one direction.

2. Take the handle off

The handle may be damaged or worn out, a window handle that is shattered is a major source of frustration. But the good part is that replacing a uPVC window handle is a very easy task that you can complete yourself. You only need a few basic hand tools and time to complete this process.

The first step is to must open the window and make sure that it is in an unlocked position. The next step is to remove the screws that hold the handle in position. After the screw caps are removed you will be able to remove the handle.

The handle is attached to a spindle in the window frame. Depending on the kind the handle is held in place either by a screw or a pin. The most popular types of handles are inline Espagnolette handles and handles with cockspurs. Both types of handles are found on casement windows, including aluminium ones. The handles can be locked with a key in order to block access by unauthorised persons from outside. Or you can lock the handles by turning them clockwise.

To remove the handle you will require a flat-bladed screwdriver. After this is released, the handle will slide off the spindle. When the handle is removed, you will need to measure the length of the spindle in order to ensure that your new handle is compatible with this size.

Once you have decided on the correct size for the handle, screw it in the correct position. It is essential to ensure that the handle is properly attached and rotates in the proper direction (clockwise if the handle is open, or counterclockwise if the handle is closed). It is crucial to make sure that the handle hasn't been placed upside down.

replace window handles the screw caps. Once you've completed this step, you are able to test the handle to make sure it is working correctly. You can also test the locking mechanism by shifting the handle from the unlocked position to the locked position and back.

3. Take off the Screws

A uPVC window handle is a crucial component of every home and is usually the first thing to begin to show signs of wear and tear or damage. It can be caused by natural causes or from frequent use, and sometimes deliberate damage by opportunistic criminals who may seek to open a closed window and gain access to your property. A simple repair can fix the issue and prevent it from happening again.

uPVC handles could also be difficult to remove when the locking mechanisms aren't working correctly. Often, the problem can be solved by replacing the multipoint lock instead of the entire handle and it's worthwhile to check this out because it could save you money.

After you have removed the handle, you'll have to take off any screws that held it in place. They're usually on the inside face of the base of the handle. You may need to use a screwdriver for this and it's important to not over tighten as this can cause the handle to loosen.

Then, you'll have to locate the screws or pins that keep the handle in place. They are typically located on the inside of the base of the handle. You'll require a screwdriver to take them off. Once they're removed you will be required to replace the caps on the screws if you wish to do so, and then test the new handle to make sure it's functioning properly.

Install the handle by adjusting the spindle to the cutout in the window mechanism. Then screw it in. Make sure that the handle is in the open position and that the screws are securely secured prior to replacing the screw covers in the event that you want to do so. Then you can enjoy your newly installed window handle. This will hopefully help you avoid costly victorian scroll door handles and window replacements in the near future. Contact us if need more information on this or any other aspect of your uPVC window.

4. Fit the New Handle

Whether you're replacing a broken handle or simply changing it the process is simple and can be completed in a matter of a few steps. Identifying the type of window handle repairs handle, measuring its spindle length and knowing what tools you'll need to complete the task are essential. Safety is always the first priority when working with tools and windows. Take your time to follow the steps and make sure that you have an appropriate handle to use.

The first step is to find the screws holding your existing window handle in place. Then, take them out, while maintaining an appropriate grip on the handle itself to stop it from crashing and causing injury. Once the screws are removed, they can be placed in a safe spot to be replaced in the future.

Once the old handle has been removed, you are now able to begin to install your new handle. It is important that the handle is fitted perfectly to ensure that it functions correctly and locks the window in its place. The next step is to slide the square metal bar on the back of the handle into the hole of the window mechanism, making sure it fits securely.

Now that your new handle is in place, the last thing to do is replace the screw caps and test it to make sure it works. If you are not satisfied with the results or the window doesn't open and close properly contact our experts for assistance.

Most homes in the UK have uPVC windows. As so, a large number of them will have to be replaced in the near future due to damage or wear. The procedure is simple and can be carried out by anyone with a bit of experience in DIY. It is crucial that the handle you choose is in line with the style and size of your window. Contact us if you are unsure of the type of handle you require. They'll be able to assist you with all of the options.