Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from hacking or key cloning, is a discrete device that can be installed without damaging your vehicle. It stops your car from starting unless you enter a specific sequence of buttons within your vehicle similar to the password of the phone.

Stop/Start

Ghost Immobilisers prevent vehicles from being stolen by stopping the engine from running unless it receives the correct PIN code. This is done without modification to the vehicle and is completely undetectable to thieves. The unit is directly connected to the ECU via the CAN databus to immobilise a vehicle. This is similar to the one used by car makers for a long time. However, thieves cannot overcome it using a brand new key or key relay technology, as they could using factory-installed systems.

Ghost is compatible with any vehicle that has an engine, which includes motorhomes, vans, cars and caravans as well as bikes. The same system is also compatible with electric cars. It's a great alternative to locking the steering wheel and wheel clamps and can be installed with little effort.

If the Ghost is activated it will block all buttons in your car and prevent the ignition from starting without the PIN code. This can be done using the Android or Apple mobile apps or by manually entering the code via your key fob. If the wrong code is entered, the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great way to deter thieves. If the vehicle cannot be started, they will move on.

The Ghost is small weatherproof device that can be concealed in the most difficult to reach areas of your vehicle. It is extremely easy to install with an average of 20-30 minutes per vehicle. It is also easy to remove should you choose to move your vehicle around or return it to valet parking or service. It is an TASSA (Tracking and Aftermarket Security Systems Association) insurance-approved system, which is recognized by a few insurance companies. It also comes with an emergency security feature that is secured by Pin Code Override, and a Service/Valet mode which can be activated by pressing a button within the app or by using your key fob.

Disarm

ghost immobiliser tracker immobilisers, unlike mechanical anti-theft devices that can be removed, are concealed within the car. Even if they were found, thieves would not be able to start the vehicle. They are almost impossible to bypass or hack. A ghost immobiliser cost immobiliser is able to prevent key cloning and signal jamming and devices spoofing. These are methods that thieves employ to gain access into vehicles equipped that have standard immobilisers.

An immobiliser functions by sending an instruction to the ECU (electronic control unit). If the incorrect code is received and the vehicle doesn't start as the engine won't start. It is possible to disable a ghost immobiliser using a software tool, but it would be very difficult and time consuming to do so. Only an authorised installer can install and use the software.

The Ghost immobiliser is a small system that sits within the wiring loom of your vehicle and is not visible to the naked eye after it has been installed. It is not visible on diagnostic systems. There are no LED indicators and it doesn't communicate with the engine through the OBD port. It communicates without sound through the CAN data circuit.

The system won't allow the vehicle to start until it receives an input PIN code that is entered by the user. The code is entered by pressing buttons on the steering wheel and door panels as well as the central console. This is a more secure method to safeguard the car because it doesn't need an additional remote control or key fob.

In addition, ghost 2 immobiliser reviews offers a service mode which can be activated through the application on your mobile phone. This allows you to give your keys to someone else for valet parking or service without needing to enter a disarm sequence.

It is not recommended to remove the system from your Ghost by yourself, regardless of whether it is in service mode. This can damage the engine. It is recommended to speak with a TASSA certified installer who can remove the system in a safe and secure manner. Our most recent GHOST immobilisers have a specific fingerprint QR sticker hidden in different parts of your vehicle. They are connected to our security register. If the system is removed and then is sold on the blackmarket it will be able to trace the owner of the system.

Anti-Hijack

The anti-hijack function is a key feature of the Ghost Immobiliser 2. This system functions as an intelligent key and is among the most secure ways to keep your car safe from thieves. Whenever the ignition switch is turned to on, and the vehicle is stationary for 30 seconds, the Ghost system will automatically stall the engine and turn the warning lights on. This gives the driver or passenger time to press a security button (depending on the vehicle) before the system is activated and the engine is again allowed to start.

The Ghost system, unlike other competitors, has a timer and controller unit that will close the fuel shut-off valve 14 after a predetermined period of time. This is even if the ignition remains on. The delay time frame must be sufficiently long to allow the owner of the vehicle who was hijacked of the vehicle to drive away from the scene of the robbery and sufficient distance from the stalled vehicle before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking features of the Ghost system, it also comes with an additional security feature that blocks common hacking methods employed to gain access to modern vehicles like relay attacks key range extending, key range hacking and ECU swapping. This is due to the fact that the Ghost system communicates silently and doesn't emit any signals that can be detected by a thief using RF scanning or code grabbing technology.

The Ghost system also comes with the option of a Service/Valet mode that allows your vehicle to be temporarily re-started and ghost Immobiliser 2 driven without the requirement of PIN codes. This is ideal for parking your vehicle and have to leave it for a short period of time, for example, to store items in the boot, open a garage door. The system will exit the service mode based on speed and time or through the simple input of a PIN code process. This gives you total security that only YOU can drive your vehicle!

Keyless Entry

Many customers are now looking for extra security measures because of the rising trend of thefts from cars using contactless. This is especially applicable to those who have put in time and money to customise their vehicle or own rare/expensive cars. Add-on immobilisers are a great method to stop this kind of theft since they prevent your vehicle from starting until the correct pin code has been entered along with your key fob.

Immobilisers are designed to intercept the various circuits in a vehicle which include those that control the starter motor ghost Immobiliser 2 and fuel pump. They can also shut off the alarm for cars in order to draw attention and ward off potential thieves.

These devices are directly connected to the engine control unit via the CAN data network and hinder thieves from gaining access to it by installing a replacement ECU or by using key programmers. These immobilisers are installed discretely and do not leave any marks on your vehicle. They are also not detected by sophisticated tools used by thieves.

Unlike other systems that require a specific app, or a tag to be worn on the person carrying it the Ghost immobiliser can only be deactivated by pressing a pattern of existing electronic buttons on your steering wheel, door panel, and centre console, allowing you to choose a personal pin sequence. The pin can be easily changed, making the device as secure as a bank card. It can also be more difficult to break because it requires up to 20 presses.

ghost 2 immobiliser near me also has a Valet/Service mode that allows you to deactivate the system if your vehicle will be handed over to valet parking or service which allows it to work within certain parameters, like 30mph speed limits and you don't have to worry about your car being driven in reckless manner. The system can be activated using the original key or entry code.

This makes it the most efficient and secure aftermarket CAN immobiliser available on the market and is fully insurance approved by Thatcham as an accessory for your car when fitted by one of our certified installers. The Ghost 2 immobiliser comes with six QR fingerprint labels and an ISR contact card with the unique QR codes and an emergency code that is safe. All of these are kept in your wallet or purse.