ghost 2 immobiliser problems (Main Page)

Created to guard vehicles from hacking and key cloning, to protect them from key cloning and hacking, the Ghost 2 immobiliser is a discrete device that can be installed without damaging your car. It will not allow you to start your vehicle unless you press the correct sequence of keys in your vehicle. It is similar to a mobile password.

Stop/Start

Ghost immobilisers prevent vehicles from being stolen by stopping the engine from running until it has received the correct PIN code. This is done with no modification to the vehicle and is totally undetectable to thieves. The unit is directly connected to the ECU via the CAN databus in order to disable the vehicle. This system is similar to the one that automobile manufacturers have used in their vehicles for a long time however, the criminal can't add a new key or utilize key relay technology to bypass it as they can with factory fitted systems.

Ghost is compatible with any vehicle that has an engine, which includes motorhomes, vans, cars and caravans as well as bikes. The same system can also be used on electric vehicles. It's a great alternative to wheel clamps and steering wheel locks.

When the Ghost is activated it will block all buttons in your car and prevent the ignition from starting without the PIN code. This can be accomplished using the Android or Apple mobile app or by manually entering the code through your key fob. If the wrong code is entered the app will show an indicator light and the Ghost will not allow the vehicle to be started again. This is a great method to discourage thieves. If the vehicle is unable to be started and they are unable to get it started, they will leave.

The Ghost is a small, weatherproof device that can be hidden away in the most difficult to access areas of your vehicle. It is incredibly easy to install with an average of 20-30 minutes for each vehicle. It is also easy to take off if you decide to change vehicles, or give it to an auto repair shop or valet parking. It is a TASSA (Tracking and Aftermarket Security Systems Association) insurance approved system that is endorsed by some insurers. It also comes with an emergency lock that is secure Pin Code Override, and a Service/Valet mode which can be activated by pressing a button in the app or by using your key fob.

Disarm

Ghost immobilisers like mechanical anti-theft devices that are able to be removed, are concealed inside the vehicle. Even if they were found and stolen, thieves would not be able to start the vehicle. They are virtually impossible to hack or bypass. A ghost immobiliser car immobiliser is capable of preventing key cloning as well as signal jamming and devices spoofing. These are methods that thieves employ to gain access into cars with standard immobilisers.

The immobiliser transmits a code to the ECU. If the wrong code is sent the vehicle will not be started as the engine will not fire up. While it is possible to disable the ghost immobiliser with an application program, this is very lengthy and complicated. Only an authorized installer is able to install and use the software.

The Ghost immobiliser is a small device that is part of the wiring loom of your vehicle and is not visible to the naked eye once installed. It won't show up on diagnostic systems, there are no LED indicators, and it does not connect to the engine via the OBD port. It communicates silently through the CAN data loop.

The system will not allow the vehicle to start until it is provided with an input PIN code defined by the user. This can be entered using buttons on the steering wheel or door panels, or on the centre console. This is a better way to safeguard the car since it doesn't require an additional remote control or key fob.

In addition to this Ghost has an option for service that can be activated through the application on your mobile phone. This lets you hand over your keys to someone else for valet parking or service, without having to enter an arm-disarm sequence.

Whether your Ghost is in service mode or not you should never attempt to remove the system on your own as it can affect your engine and cause damage. It is best to contact a TASSA-verified installer who can safely and effectively remove the system. Our latest GHOST immobilisers include a special fingerprint QR sticker hidden in different parts of your vehicle. These are linked to our security register. If the system is removed and later sold on the black market, this will allow you to trace the owner of the system.

Anti-Hijack

Ghost Immobiliser 2 has a highly effective anti-hijack function. It functions like a smart key and is one of the most secure ways to ensure your car is safe from theft. Whenever the ignition switch is turned to on, and the car remains stationary for a period of 30 seconds and the ghost immobiliser car system will automatically stop the engine and turn the hazard lights on. This gives the driver or passengers enough time to press a secret security button (depending on the vehicle) before the system reactivates and the engine is once again allowed to begin.

The Ghost system, unlike most competitors, uses an electronic timer and controller that will close the fuel shut-off valve 14 after a set period of time. This is regardless of whether the ignition remains on. The delay time frame must be long enough to allow the victim of the vehicle to move away from the location of the robbery and sufficient distance from the vehicle that is stalled before the system is able to reactivate.

In addition to the standard CANbus immobiliser blocking features of the Ghost, it has an additional level of security that prevents common methods of hacking that are used to hack into modern vehicles, such as relay attacks, key range extending and ECU swapping. The Ghost system communicates in a silent manner and does not emit signals that could be detected by thieves using RF scanning or code-grabbing technology.

The Ghost system has the valet or service mode that allows your vehicle to be temporarily started and driven without the requirement for a PIN code. This is ideal when you park your vehicle and only need to leave it for a brief time, such as to open the garage door or put groceries in the boot. The system will then exit the service mode according to the speed and time, or ghost 2 immobiliser Problems via a simple PIN code input process. This gives you complete security that only YOU can drive your car!

Keyless Entry

Many consumers are now seeking additional security measures due to the growing trend of car thefts using contactless technology. This is especially true for those who invested time and money to customise their vehicles or own expensive cars. An add-on immobiliser can be a cost-effective way to prevent this kind of theft since it will stop your vehicle from starting unless the right pin code is entered alongside your key fob.

Immobilisers are made to block the various circuits in a vehicle such as ones that control the starter motor and Ghost 2 immobiliser Problems the fuel pump. They also can shut down the car alarm to draw attention and scare off any potential thieves.

These devices communicate directly with the engine control unit through the CAN data network and stop the thief from gaining access to it by installing a replacement ECU or using key programmers. These immobilisers can be fitted discreetly in your vehicle, leaving no marks and are completely inaccessible to the tools high-tech thieves employ.

Unlike other systems that require a separate application, or a tag that is worn on the person of the driver, a Ghost immobiliser can only be deactivated by pressing a sequence of electronic buttons that are already present on your steering wheel, door panel and the centre console, which allows you to choose a personal pin sequence. The pin can easily be changed, making the device as secure as a credit card. It is also more difficult to break because it requires up to 20 presses.

Ghost also comes with a Valet/Service mode that allows you to disable the system if your vehicle is to be turned over for valet parking or service, enabling it to work within certain parameters such as 30mph speed limits which means you don't need to worry about your vehicle being driven in reckless manner. The system can be activated by using the original key or entry code.

This makes it the most effective and secure aftermarket CAN immobiliser on the market, and is insurance approved by Thatcham as an optional accessory for your car when installed by one of our authorised installers. The Ghost 2 immobiliser is also supplied with six QR fingerprint labels, an ISR contact card with your unique QR code and a secure emergency code which can be kept in the purse or wallet of your car.