UPVC Window Handle Replacement

Replacing a broken window handle is a easy task and, with the right tools, it can be done quickly. It is important to know the type of handle and its spindle's length prior buying a replacement.

Older uPVC window handles have a spur which protrudes and locks on a wedge striker. They can be left or right-handed and must be to be matched when replacing.

What type of lock and handle do I need?

There are many different types of glass window replacement near me handles made of upvc and locks, each with their distinct advantages and functions. The type of handle you have will determine the ease to open your windows and whether or not the locking mechanism functions according to the plan. Over time, and with regular use, the upvc handles on your windows can be damaged and worn out. This makes them less secure and effective. In some instances they could even be completely removed. It is crucial to fix the handles on your window made of upvc when you notice them falling off. This will help prevent burglaries and ensure that your home is secure.

It's a task that virtually anyone can perform. With just a few tools and the right information it's a simple procedure that shouldn't take longer than a couple of minutes. You will need to be aware of the type of lock or handle you have on your window. This will help you select the correct replacement.

Inline Espagnolette Handles

They are typically located on the outside of the window. They are flat in design and feature an opening that is connected to the locking mechanism on the window frame when turned. Inline upvc handles also come with spindles that run through the centre of the handle, and into the frame of the window to operate the latch.

Cockspur Handles

They are typically found on older uPVC window frames and have a distinctive, hook-shaped design. Cockspur handles have one screw that secures the handle to the frame of the window and aren't as secure as other kinds of window handles.

Tilt and Turn Handles

The tilt and turn handles differ from other upvc handles because they can be turned for opening the window, and then lowered into the window to ventilate. They typically feature a 7mm spindle on the back of the handle. They are available in both left and right handed versions.

When buying replacement upvc handles, it is important to verify the length of the spindle because not all handles are the same size. To determine the length of your handle made of upvc, simply drop something in the middle of the hole and measure the distance it travels before it reaches an obstruction. This is the maximum spindle length that will fit your window.

What is the spindle?

uPVC window handles operate in a similar way to doors, by turning the handle to operate an opening inside the frame. The window is then opened and closed. But, at times, the handles may become damaged, especially when they are frequently used or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they're not functioning properly.

There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are made in a variety of ways to fit into uPVC frames. Each handle type utilizes a different spindle to lock the window mechanism. It is crucial to know the type of handle installed on your uPVC windows so that you can replace it with the correct one.

You can find out what kind of uPVC handle you have by inspecting the base of the handle. There should be a "snap-in cover' over one screw that holds the handle's base in the correct position. When you remove this cover, you will be able see the second screw that holds the base of the handle in position. After both screws have been removed and you are able to remove the handle from the uPVC.

After removing the uPVC handle, remove it from the locking mechanism. Make note of the length of the spindle as you'll need to make sure that you buy an alternative that is the same length as the original handle and locking mechanism.

The spindle wears down and becomes inoperable with the locking mechanism. This could be due to corrosion, damage caused by frequent use, or the locking mechanism becoming looser. If this happens, you'll have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.

How do I get rid of my old handle?

Over time and through everyday use, window handles can be damaged or destroyed, and if this happens it is essential to fix them as soon as possible to ensure the safety of your home. It is easy to replace a worn or damaged handle. The task can be accomplished in less than a minute without the need for any special tools.

The first step in removing the old handle is to remove the screw that is located at the top of the handle base. Once the screw is removed, the handle will be pulled away. A second screw is located at the base of the handle. This too can be removed. Once both of these screws are removed, the handle can be completely detached from the base of the window.

After removing the handle and align the fixing holes of the new handle with the existing holes in the window frame. If there is a cap or sticker on the new handle, remove it if necessary and then screw the handle in the appropriate position. Once the handle is set, it is important to test that it is working by turning the handle and making sure that the lock mechanism is activated.

Espag handles have a spindle which protrudes from the handle and slots into the multipoint locking mechanism on the frame of the window. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.

After you have installed the new handle, insert the spindle into the window lock and tighten it. Once the handle is securely fixated then replace the snap-in cover and screw cap (if appropriate). Now that the handle is in use, simply open and close the window a few times to ensure it works correctly and securely.

How do I put in the new handle?

It's not difficult to change the handle on your Upvc windows. The process is very simple. All you need is a screwdriver and a little bit of patience. First, ensure that the handle is not locked. Remove any visible screws. You can also replace them with screw caps. After you have removed the handle, you'll need to take note of the length of spindle that extends from the back. This is crucial because it will determine the kind of handle to buy.

Espagnolette handles that are made of uPVC are the most sought-after kind of handle. The spindle passes through the handle to operate the locking mechanism inside the frame of the window. When the handle is turned it releases the latch on the window and allows it to open. Over time and through regular use, espagnolette handles may be damaged or destroyed which is why it is essential to find a replacement.

Cadenza handles are a second type of uPVC window handle, which is typically used on tilt and turn windows. They feature a protruding blade that is operated by a multi-point locking mechanism within the window. They are more secure than the espagnolette handles since they only open from the inside. They can be replaced by the same method as espagnolette handles, however you should make sure that the new handle has an angled blade, as opposed to a flat one.

Once you have determined the correct handle to purchase You can simply align the new handle with the existing screw holes, and then screw it into the appropriate position. Then, put the screw covers on and test your new handle. This is accomplished by moving the handle from the locked to the unlocked position and then back to the locked position a few times. If you experience any issues, it may be beneficial to speak with a professional to determine if they can assist in resolving the issue. They can offer advice on how to resolve the issue in a quick and efficient manner.